HobbyKing
2.4GHZ 100MW TX/RX & 1/3-INCH CCD CAMERA NTSC
| CCD sensor type | 1/3 color SONY CCD |
| NTSC | 510(H)*492(V) |
| PAL | 500(H)*582(V) |
| Scanning system | Interlaced scanning |
| Synchronization | System |
| Horizontal resolution | 420TV line |
| DSP+CCD | CXD3142R+405AK |
| S/N Ratio | 48dB |
| Gamma Modification | 0.45 |
| White balance | Auto |
| Auto backlight compensation | Auto |
| Lens | 3.6MM |
| Input voltage | 9~12.6V |
| Electronic Shutter | 1/50 (60) ~ 1/100,000s |
| Video output | 1.0VP-P composite video |
| Operation Temp. | -20~50 |
| Size | 38*38mm |
| Flight time | Approx 60min/100mah 3S |
| Channel | 4-Ch, AV synchronization |
| Power | 100mW |
| Input voltage | 8~12V |
| Weight | 29.9g |
| Size | 41x28x16mm |
| Frequency | 2.4G 2.410G/2.430G/2.450G/2.470G |
Audio: No,
12 Channel Tx/Rx video system with CCD camera. The camera ...5 Reviews
HobbyKing
C2020 MICRO BRUSHLESS OUTRUNNER 3500KV (11G)
| Diameter | 20.2mm |
| Length | 20mm |
| Shaft | 5mm |
| Weight | 11g (with 10cm wire) |
| Power | 60W |
| Resistance | 262 |
| Idle Current | .3A |
| Max amp | 10A (15sec burst) |
| Voltage | 2-4cell Lipoly |
Kv: 3500rpm/v, Turns: 25,
Specifications. We do not have a suggested prop size for ...5 Reviews
HobbyKing
TURNIGY MACH2 13.5T BRUSHLESS R/C CAR MOTOR W/TIMING ADJUST 3500KV
| Weight | 204g |
| Diameter of shaft | 3.17mm |
| Length of front shaft | 15mm |
| Power | 205W+ |
Specifications:, Dimension:, 53mm x 36mm(43mm w/Batt-terminal) , 70mm(with shaft), Kv:3500rpm/v, Cells:, 4-7NiMh / 2-3S Lipoly,
Turnigy Mach2 Brushless R/C Car Motor w/timing adjust. This brushless ...5 Reviews
HobbyKing
TURNIGY2836 BRUSHLESS OUTRUNNER 2350KV
| Magnet type | 45SH |
| Voltage | 3-4S Lipoly |
| Prop | APC4.7x4.25 |
| Thrust | 800g |
| Power | 480W |
Dimension:, 28mm x 40mm, 56mm(with shaft), Weight:, 79g (kv2350) (not including connectors), Diameter of shaft:��, Length of front shaft:��, Lamination thickness: .,
F4.0mm F15mm 2mm Max performance;5 Reviews
HobbyKing
GWS PG-02 PIEZO GYRO/JR
| Dimension | 28.5 x 26.5 x 11mm |
| Power supply | 4.8~6V |
| Current drain | 30mA (At 4.8V) |
| Operating temperature | -5~+50C |
Specification:, Weight:, 11g(Gyro only) 13g (with gyro mount), Gain adjustment:, Dual-Gain (Remote control), Applicable R/C systems:, Futaba, JR, Hi-Tec, Sanwa/Airtronics Multiplex, GWS,
5 Reviews
HobbyKing
RCG 26CC GAS ENGINE W/ CD-IGNITION 2.6HP/1.95KW
| Displacement | 26cc |
| Weight | 1122g |
| Carburettor | (Japanese Walbro) Diaphragm & Butterfly valve. |
| Prop Speed | 1500 ~ 8000rpm |
| Max power | Over 1.95kw |
| Suggested prop | 18x8 7100rpm (standard two leafs prop) |
| Ignition | DC-CDI (computer controlled auto advance electric ignition system) |
| Lubrication oil | 2 cycle engine oil |
| Bore/Stroke | 34mm x 28.6mm |
Mixture: 25:1 to 40:1,
With its easy starting characteristics and reliable low-maintenance running the ...5 Reviews
HobbyKing
C1826 MICRO BRUSHLESS OUTRUNNER 2400KV (18G)
| Diameter | 18mm |
| Length | 27mm |
| Shaft | 4mm |
| Weight | 18g (with 10cm wire) |
| Power | 65W |
| Resistance | 212 |
| Idle Current | .4A |
| Max amp | 10A (15sec burst) |
| Voltage | 2-4cell Lipoly |
Kv: 2400rpm/v, Turns: 10,
Specifications. We do not have a suggested prop size for ...5 Reviews
HobbyKing
TURNIGY NANO-TECH 4500MAH 6S 25~50C LIPO PACK
More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots! Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!Spec.Capacity: 4500mAhVoltage: 6S1P / 6 Cell / 22.2VDischarge: 25C Constant / 50C BurstWeight: 687g (including wire, plug & case)Dimensions: 168x49x44mmBalance Plug: JST-XHDischarge Plug: 4mm bullet-connectorSuited to the following models: 6S: MIKADO LOGO500, ALIGN T-REX600, GAUI X5, Outrage 550, Hirobo SDX6S x 2: ALIGN T-REX700E, RJX X-TREME90EP, HENSELEIT TDR2010, Rave 90 ENV FBL, Avant eAurora90, JR Airskipper E12, Kasama Srimok 90E, Shape 9.0 Rigid, HIROBO Shuttle Plus+2/Eagle3 EP, JR Vibe 90SG E12 * The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. 1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity. 2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly. Advantages over traditional Lipo batteries.Power density reaches 7.5 kw/kg.Less Voltage sag during high rate discharge, giving more power under load.Internal impedance can reach as l,
5 Reviews
HobbyKing
VARIABLE PITCH PROP & MOTOR SET 10" TYPE B
| Motor | D3123-1000kv |
| Voltage | 11.1v |
| Max Power | 100W |
| Weight | (About) 43g |
| Prop | 10inch |
Test Data:, Prop Voltage RPM Current Thrust,
This easy to install unit will enable you to reverse ...3 Reviews
HobbyKing
TURNIGY 2836 BRUSHLESS EDF MOTOR 3200KV
| Diameter of shaft | 3.17mm |
| Length of front shaft | 14mm |
| Magnet type | 45SH |
| Voltage | 3-5S |
| Power | 650W |
Dimension:, 28mm x 38mm, 53mm(with shaft), Weight:, 72g (kv3200) (not including connectors), Lamination thickness: ., Prop:, 70mm EDF (3~5 Blade),
2mm Max performance For 70 size EDF5 Reviews
HobbyKing
MYSTERY 20A BRUSHLESS SPEED CONTROLLER (BLUE SERIES)
| Amp rating | 20A |
| (10sec) | 30A |
| BEC Output | 5.0V / 2A |
| Dimensions | 33x23x6mm |
| Weight | 20g |
| PWM frequency | 8Khz/16Khz |
| This ESC is also sold as | HobbyKing BlueSeries. |
Voltage:, 7.4-11.1V (2-3 cell Lipo/5-10 NiCd), Main Functions:, Safety mode:, the motor won't start no matter what the position of the control stick is when switch on the RC unit., Brake setting:, On/Off (factory default is off), Low current protection:, Ignore/Reduce power/Shut off, Temperature protection:, Reduce power when temperature reaches 120C,
Spec. Burst Rate Three point battery type and low voltage ...5 Reviews
HobbyKing
2205C 1400KV BRUSHLESS MOTOR
| Weight | 28g |
| Shaft | 3mm |
| Max Amp | 9.5A |
| Max Power | 121.5W |
| Thrust | 497g |
| Max Amp | 6.5A |
| max Power | 58W |
| Thrust | 349g |
5 Reviews
HobbyKing
TURNIGY 2627 BRUSHLESS OUTRUNNER 1200KV
| Diameter of shaft | 3mm |
| Length of front shaft | 12mm |
| Magnet type | 45SH |
| Voltage | 2-3S |
| Prop | APC7x4 |
| Thrust | 480g |
| Power | 130W |
Dimension:, 26mm x 27mm , 40mm(with shaft), Weight:, 39g (kv1200) (not including connectors), Lamination thickness: .,
2mm Max performance For 300~500g airplane.5 Reviews
HobbyKing
TURNIGY 2211 BRUSHLESS INDOOR MOTOR 1300KV
| Magnet type | 45SH |
| Voltage | 2-3S |
| Prop | EP8x4.3 |
| Thrust | 210g |
| Power | 40w |
Dimension:, 20mm x 14mm, 26mm(with shaft), Weight:, 20g (kv1300) (not including connectors), Diameter of shaft:�, Length of front shaft:�, Lamination thickness: .,
F2mm F9.1mm 2mm Max performance; For 200~300g indoor small planes. ...5 Reviews
HobbyKing
HOBBY KING S1 SERVO DOCTOR W/ GYRO SENSOR
| Input voltage | 8~12V (2S lipo or 9V 2A DC power supply) |
| Accuracy | 1us +/- 10% |
| Weight | 21g |
| Size | 69x33x11mm |
| Operating temperature | -10~50°C |
Specifiaction:, Output voltage: 5V, Output current: 1A,
Hobbyking S1 servo tester is specifically designed to accurately measure ...5 Reviews